Cabinet Water Softener

 

Small volumes of softened water are required on a non-continuous basis, if space is limited; a Cabinet Water Softener could offer the perfect solution.

 

These trim units, supplied inside a rotationally modelled cabinet are perfect for guaranteeing a cushioned supply to dishwashers, glass washers, laundry equipment and small scale applications in hotels, hospitals care homes and other business premises. Water Softeners are largely very reliable items of equipment; however a little attention occasionally is required to ensure that it continues to give excellent service over time.

 

A supply of appropriately graded high purity softener salt will be required for regular top up in the brine bin (for the production of the brine solution used in the regeneration process).

 

Regular servicing by Puretech Ltd is highly recommended for continued performance.

Simplex Water Softener

 

Simplex Water Softeners are ideally suited for applications where there is a steady demand for moderate levels of softened water over the course of a working day. Regeneration, occurs when no supply to service is available, it is programmed to take place at a time when there is no demand (typically during the night). For this reason, Simplex Water Softeners are sized to give at least one days supply of softened water output before regeneration.

 

The start of the regeneration cycle can however also be controlled by water quality or volume produced (i.e. when the service water drops below a pre-assigned set point, be that ppm of hardness or m3 created, regeneration will begin); this might be of advantage where treated water storage tanks are accessible to hold adequate holdings to manage usage whilst the unit is temporarily out of use.

 

Typical applications for this style of Water Softener would be for:

 

  • Laundry facilities

  • Commercial Glass and Dishwashing installations

  • Low usage boiler feed

 

Water Softeners are extremely dependable items of equipment; however a small level of regular maintenance maybe required to make sure that they continue to give good service.

 

A supply of appropriately graded high purity softener salt will be required for regular top up in the brine bin (for the production of the brine solution used in the regeneration process).

Click on link to view Data Sheet

FLECK

(Flow Range: 0.4 - 3m³/h, Connections: 3/4" BSPM) - 5600 SIMPLEX SOFTENERS

(Flow Range: 3.4 - 5.5m³/h, Connections: 1" BSPM) - 2750 SIMPLEX SOFTENERS

(Flow Range: 3.9 - 10m³/h, Connections: 1½" BSPF) - 2850 SIMPLEX SOFTENERS

(Flow Range: 3.4 - 5.5m³/h, Connections: 2" BSPF) - 2910 SIMPLEX SOFTENERS

(Flow Range: 14 - 42m³/h, Connections: 3" BSPF) - 3900 SIMPLEX SOFTENERS

 

SIATA

(Flow Range: 0.6 - 4.5m³/h, Connections: 1" BSP) - V132 SIMPLEX SOFTENERS

(Flow Range: 4 - 8m³/h, Connections: 1¼" BSP) - V230 SIMPLEX SOFTENERS

(Flow Range: 9 - 18m³/h, Connections: 1½" BSP) - V250 SIMPLEX SOFTENERS

(Flow Range: 20 - 40m³/h, Connections: 2" / 3" BSP) - V360 SIMPLEX SOFTENERS

 

Duplex Water Softener

 

 Duplex Water Softeners are ideal for sites with changeable water demand or for applications where a continuous and uninterrupted supply of softened water is required. The twin vessel configuration allows for one resin vessel to always be in service whilst the other is in regeneration or standby thus guaranteeing 24/7 soft water production.

 

The start of the regeneration cycle can be controlled by time clock, water quality or volume produced.

 

  • Timer-controlled units tend be work best when daily soft water requirement is relatively constant, the units then being set to regenerate when general consumption low.

  • Meter controlled models are ideal when daily water requirements are variable. Having sized the water softener correctly, the regeneration cycle occurs when the set capacity for producing soft water is reached (this is particularly useful when water and salt consumption must be kept to an absolute minimum).

  • Where a specific water quality is consistently required, initiation of regeneration by output quality creates a safeguard ensuring that supply to service will always meet production requirements.

 

Typical applications for this style of water softener would be:

 

  • A pre-treatment to water purification equipment such as Reverse Osmosis

  • Large Scale Boiler Feed

 

Water Softeners are extremely dependable items of equipment; however a small level of regular maintenance maybe required to make sure that they continue to give good service.

 

A supply of appropriately graded high purity softener salt will be required for regular top up in the brine bin (for the production of the brine solution used in the regeneration process).


Regular servicing by Puretech Ltd is highly recommended for continued performance.

Click on link to view Data Sheet

FLECK

(Flow Range: 0.5 - 3.5m³/h, Connections: 1" BSPF) - 9000 DUPLEX SOFTENERS

(Flow Range: 0.5 - 3m³/h, Connections: 1" BSPF) - 9100 DUPLEX SOFTENERS

(Flow Range: 5.6 - 6.8m³/h, Connections: 1½" BSPF) - 9500 DUPLEX SOFTENERS

(Flow Range: 4.1 - 18m³/h, Connections: 2" BSPF) - 2910 DUPLEX SOFTENERS

(Flow Range: 25 - 42m³/h, Connections: 3" BSPF) - 3900 SIMPLEX SOFTENERS

 

SIATA

(Flow Range: 0.6 - 4.5m³/h, Connections: 1" BSP) - V132 DUPLEX SOFTENERS

(Flow Range: 4 - 8m³/h, Connections: 1¼" BSP) - V230 DUPLEX SOFTENERS

(Flow Range: 9 - 18m³/h, Connections: 1½" BSP) - V250 DUPLEX SOFTENERS

(Flow Range: 20 - 40m³/h, Connections: 2" / 3" BSP) - V360 DUPLEX SOFTENERS

Bespoke Water Softener 

 

 Puretech Ltd works for their clients in mind; we make sure we understand your needs and by using our engineering expertise and experience we can design individual packages for you. We can offer a fully bespoke package to your requirements, including on or offsite build, installation, commissioning and on-going support.

 

Packages may include:

 

  • Triplex Water Softeners - offering the benefit of a continuous, non-interrupted flow of softened water to service whilst enabling you to achieve high service flow rates on demand.

  • Integration with other pre-treatment technologies.

  • Skid mounted units - providing both flexibility and containment in a designated area.

  • Online Water Hardness Monitoring - Allowing remote continuous residual hardness monitoring.

  • Bulk Salt Saturators Systems - maximising storage capacity and minimising manual handling.

  • Bespoke Controls Systems - integrating into existing site monitoring equipment.

 

Using a combination of quality components Puretech Ltd has the capability to provide a flexibility of configuration to suit virtually any application.

 Puretech Limited, 10 Thornhayes Close, Frampton Cotterell, Bristol BS36 2BG

T: 01454 854198, M: 07976 275464, nigelw@puretechlimited.co.uk

 

 

© ​2016 by Puretech Limited